Advertisement
13) Remove the pin securing the gear to the
cam.
14) Assemble the spring [28], spacer [29],
staple jam releasing gear [30], timing
belt [31], and relay gear [32] and secure
them with the E-ring [33].
1.2.3 Adjusting the Phase of the Gear in the Saddle Unit
If the gears at the front of the saddle unit or
the paper fold rollers in the sale unit are re-
placed or removed for some reason, adjust
the gear phase following the procedure de-
scribed below.
1) The paper fold rollers [1] and saddle
cam [2] must be positioned as shown
below.
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[29]
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
13
CHAPTER 3 MECHANICAL SYSTEMS
[28]
[30]
F03-102-13
F03-102-14
3/28/01, 12:09 PM
[31]
[32]
[33]
[2]
[1]
3-13
Advertisement
