Advertisement
CHAPTER 5 TROUBLESHOOTING
4.2.4 E590, Punch Motor Fault (detail code: 01/02)
Punch motor home position sensor (PI1P)
1) Check the punch home position sensor. Is the sensor normal?
NO:
Punch motor clock sensor (PI3P)
2) Check the punch motor clock sensor. Is the sensor normal?
NO:
Wiring
3) Is the wiring between the finisher controller PCB and the sensor
normal?
NO:
Punch mechanism, Punch motor (M1P)
4) Is there a fault in the punch mechanism?
YES: Correct the punch mechanism.
NO:
Punch controller PCB, Finisher controller PCB
5) Try replacing the punch controller PCB. Is the problem corrected?
YES: End.
NO:
4.2.5 E592, Punch Sensor (horizontal registration) Fault (detail code: 01
through 05)
Horizontal registration sensor (photosensor PCB/LED PCB)
1) Check the horizontal registration sensor. Is the sensor normal?
NO:
Wiring
2) Is the wiring between the punch controller PCB and the horizontal
registration sensor normal?
NO:
Punch controller PCB, Finisher controller PCB
3) Try replacing the punch controller PCB. Is the problem correct?
YES: End.
NO:
5-26
COPYRIGHT © 2001 CANON INC.
Chap05.p65
Replace the sensor.
Replace the sensor.
Correct the wiring.
Replace the punch motor.
Replace the fisher controller PCB.
T05-402-04
Replace the sensor.
Correct the wiring.
Replace the finisher controller PCB.
T05-402-05
2000 2000 2000 2000
26
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:11 PM
Advertisement
