Advertisement
5) While lifting the processing tray upper
cover [3], disconnect the connector [4];
then, detach the processing tray upper
cover [3].
1.1.6 Removing the Upper Right Cover Assembly
1) Remove the front cover. (See 1.1.2.)
2) Remove the rear cover. (See 1.1.3.)
3) Remove the two screws [1] at the front
and the two screws [2] at the rear; then,
detach the upper right cover assembly
[3].
COPYRIGHT © 2001 CANON INC.
Chap03.p65
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
5
CHAPTER 3 MECHANICAL SYSTEMS
[3]
F03-101-10
[1]
F03-101-11
[3]
F03-101-12
3/28/01, 12:09 PM
[4]
[3]
[2]
3-5
Advertisement
