CHAPTER 3 MECHANICAL SYSTEMS
3) Remove the screw [4], and detach the
processing tray rear cover [5]; then, de-
tach the upper cover [6].
1.1.5 Removing the Processing Tray Upper Cover
1) Remove the front cover. (See 1.1.2.)
2) Remove the rear cover. (See 1.1.3.)
3) Remove the upper cover. (See 1.1.4.)
4) Disconnect the connector [1], and re-
move the screw [2].
3-4
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[5]
[1]
2000 2000 2000 2000
4
[6]
[4]
F03-101-08
[2]
F03-101-09
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:09 PM