Fuji Xerox DocuPrint CP315 dw User Manual page 88

To set a certificate of SSL/TLS Server, SSL/TLS Client, or Wireless LAN (Client), select [Local Device].
5.
Select the purpose of use from the [Certificate Purpose] list.
6.
Click [Display the List].
Note
• If the list includes more than 20 certificates, click [Next] to display the next page.
7.
Select the certificate to associate.
Make sure that [*Valid] is displayed in the [Validity] column for the selected certificate.
8.
Click [Certificate Details].
9.
Check the content, and then click [Use this certificate] at the upper-right corner.
Confirming the Settings of a Digital Certificate
1.
Start CentreWare Internet Services.
Refer
• For details about how to start CentreWare Internet Services, see "Starting CentreWare Internet Services (P.61)."
2.
Click the [Properties] tab > [SSL/TLS Server Communication] on the left pane of the screen.
3.
Click [Certificate Management].
4.
Specify the conditions for displaying a certificate you want to confirm.
For example, to display a certificate that is issued by a trusted certificate authority, select [Trusted
Certificate Authorities] from the [Category] list.
5.
Click [Display the List].
Note
• If the list includes more than 20 certificates, click [Next] to display the next page.
The certificate displayed with an asterisk as [*Valid] in the [Validity] column is the certificate associated
with the purpose of use and currently used.
Deleting a Digital Certificate
1.
Start CentreWare Internet Services.
Refer
• For details about how to start CentreWare Internet Services, see "Starting CentreWare Internet Services (P.61)."
2.
Click the [Properties] tab > [SSL/TLS Server Communication] on the left pane of the screen.
3.
Click [Certificate Management].
4.
Specify the conditions for displaying a certificate you want to delete.
For example, to display a certificate that is issued by a trusted certificate authority, select [Trusted
Certificate Authorities] from the [Category] list.
5.
Click [Display the List].
Note
• If the list includes more than 20 certificates, click [Next] to display the next page.
6.
Select the certificate to be deleted, and then click [Certificate Details].
7.
Click [Delete] at the upper-right corner.
Note
• When a certificate is deleted, the features associated with the deleted certificate are disabled. To delete a certificate
being used, either set the feature to OFF in advance or switch the association to another certificate, and then switch to
another operation mode if possible before deleting the certificate.
88
User Guide