Fuji Xerox DocuPrint CP315 dw User Manual page 56

▌
[Administrator Menu] > [System Settings] >
[RAM Disk]
Specifies whether to allocate memory to the RAM disk file system for the stored print feature. When this feature
is enabled, the RAM disk size can be specified. The change becomes effective after the printer is restarted.
▌
[Administrator Menu] > [System Settings] >
[Substitute Tray]
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not
match the paper size settings for the current job.
[Off]
[Larger Size]
[Closest Size]
[Bypass Tray]
▌
[Administrator Menu] > [System Settings] >
[A4/Letter Switch]
Specifies whether to print A4 size jobs on Letter size paper if A4 size paper is not available, or to print Letter size
jobs on A4 size paper if Letter size paper is not available.
▌
[Administrator Menu] > [System Settings] >
[Auditron Mode]
Specifies whether to limit access to color printing. The change becomes effective after the printer is restarted.
▌
[Administrator Menu] > [System Settings] >
[No Account User Print]
Specifies whether to permit the printing of data without authentication information. The change becomes
effective after the printer is restarted.
▌
[Administrator Menu] > [System Settings] >
[Auto Color To Mono Print]
Specifies whether to print all print jobs in black and white even when color print is specified.
▌
[Administrator Menu] > [System Settings] >
[LetterH Dup Mode]
Specifies whether to print on both sides when using letterhead.
▌
[Administrator Menu] > [System Settings] >
[Low Toner Msg]
Specifies whether to show the alert message when toner is low.
▌
[Administrator Menu] > [System Settings] >
[FW Download Mode]
Specifies whether to enable download of firmware updates.
▌
[Administrator Menu] > [System Settings] >
[Hex Dump]
Specifies whether to help to isolate the source of a print job problem. With this setting enabled, all data sent to
the printer is printed in hexadecimal and character representation. Control codes are not executed.
56
User Guide
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger paper size, the
printer substitutes paper of nearest size.
Substitutes paper of nearest size.
Substitutes paper from the bypass tray.