Mottle
Problem
The printout is mottled.
Ghosting
148
User Guide
Action
1
Make sure that the correct print media is being used.
Refer
• For details, see "Supported Print Media (P.64)."
If the problem persists, proceed to step 2.
2
Raise the transfer unit voltage.
Refer
• For details, see "[Adjust 2nd BTR] (P.57)."
3
Replace the drum cartridges and print a Demo Page for verification.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)" and "[Demo
Page] (P.44)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.