Plc Hardware Configuration - Pepperl+Fuchs PCV100-F200-B17-V1D-6011 Manual

Safe Position Detection with PCV100-F200-B17-V1D-6011
Installation
Connector Assignment
Profinet 1 & 2
1
4
3
Figure 3.4
For details of suitable PROFINET cables, .
3.4

PLC Hardware Configuration

Modules Status_1 and X-Position_1 are required as a minimum when configuring the hardware
for the reader in order to ensure safe position detection. Additional modules for specific
evaluations can be added if necessary.
Figure 3.5
To determine the safe position, the following settings are required when configuring the
readers:
10
2
Modules contained in the hardware configuration