Table of Contents
Advertisement
LGM Series
IO-Link Programming
This parameter can be used to further identify the device by means of a numerical value. This
value may be a plant ID.
The value can be altered within the permissible value range and is saved permanently in the
device.
UT2 - User Tag 2
Index hex (dec)
0xC1 (193)
This parameter can be used to further identify the device by means of a numerical value. This
value may be a configuration ID.
The value can be altered within the permissible value range and is saved permanently in the
device.
Version information
This section describes parameters for the version of the device that help with diagnostics.
Hardware Revision
Index hex (dec)
0x16 (22)
This parameter contains the hardware version of the device.
The value is fixed and cannot be modified.
Firmware Revision
Index hex (dec)
0x17 (23)
This parameter contains the firmware version of the device.
The value is fixed and cannot be modified.
8.4.2
Parameterization and Configuration
This section describes the parameters that are used to configure the device during commis-
sioning (configuration parameters) and to adjust the device to the specific operating environ-
ment (operating parameters).
Operating parameters
Configuration Operating Mode - Measurement Data Mode
Index hex
(dec)
Height/Position Value Mode
0x60 (96)
This parameter can be used to set the required mode for the measured value output. The mea-
sured value is output as process data in analog data channel 1 (ADC1) (see process data).
52
Sub
Date
index
R/W
type/Length
0
R/W
Uinteger 16
Sub
Date
index
R/W
type/Length
0
R
char[7]
Sub
Date
index
R/W
type/Length
0
R
char[7]
Subindex
R/W
12
R/W
Type
Remanent
Type
Constant
Type
Constant
Date
type/Length Type
Uinteger 16
Remanent
Default value
Default value
Example:
HW01.00
Default value
Example:
FW01.05
Default
Value range
value
0 ... 30
0
See table
below
Advertisement
Table of Contents
