Medema Mini Crosser M2 Service Manual page 58

Medema A/S
Service manual P9-0157-S
The Mini Crosser can be used as a seat during transport in
a van or bus, provided it is securely anchored to the vehicle
with approved four-point belts attached to the restraint points
provided on the Mini Crosser.
The Mini Crosser's restraint points have been tested and
approved in accordance with ISO 7176-19.
The user must also always be independently restrained in the
actual motor vehicle in accordance with traffic legislation rules.
Example
Tighten the belt by pulling on the loose strap. Undo it again by
lifting the buckle. This is the same as on an aircraft.
Retractor
with belt
For transport in an estate car,
the seat can be lifted off and the
handlebars folded down. This
reduces the maximum height to 69
cm.
Restraining the
passenger with a static
3-point seat belt:
Secure to the rearmost
retractors.
The shoulder belt must rest
against the collar bone and
fall diagonally to the hip,
where it is secured.
58 of 70
Male and
female parts of
belt done up
Version 2.0.9 - 2018