Maintenance - Medema Mini Crosser M2 Service Manual

Medema A/S
Service manual P9-0157-S

Maintenance

Daily:
Test the lights and indicators before using the scooter in the dark
Š
or poor visibility.
Every three months:
Test the brakes. With the disengagement lever up, it must not
be possible to push the Mini Crosser.
Test the brake disengagement function.
Š
With the brake disengagement lever down, the scooter must
not be able to go when the accelerator is activated. The battery
indicator should flash error 9.
When the disengagement lever is up and the scooter has been
switched off and on, the scooter should be able to go again. It
must not be possible to push it.
Test the accelerator.
Š
With the scooter turned off, activate the accelerator while turning
the scooter on. The scooter must not be able to go. The battery
indicator should show running lights from the center and out.
With the scooter turned on, press the accelerator forward a touch.
Š
When it is released, the scooter should stop completely and the
brake should click. It must not be possible to push the scooter.
Perform the same test again, but pressing the accelerator back.
Lubricate the lever arm on the front brake hub with acid-free oil.
Š
Check the tyre pressure and tread.
Š
Annual
Safety checks
The Mini Crosser M is designed for safe travel for at least 10 years,
2
up to a max. of 5,000 hours, provided it is serviced and safety-checked
every year, corresponding to 500 hours of operation. The service must be
carried out either by Medema A/S or an authorised workshop.
IMPORTANT! For safety reasons it is of the utmost importance that the
servicing and safety check intervals are complied with, as this minimises
the risk of brake failure and short-circuits in the wiring, which could
generate heat and cause a fire.
11 of 70 Version 2.0.9 - 2018