Medema Mini Crosser M2 Service Manual page 25

Medema A/S
Service manual P9-0157-S
Parameter description
Service PIN Password for the Technician/Service menu.
Enter a four-digit PIN code. The value can be changed
using +/-. Move on to the next digit using the button under
Next. Accept by pressing Enter.
Display charge curve See the following section for further details.
Horn
Button 1-4 Each of the four horn switches, two on the left and two on
the right of the handlebars, can be programmed individually
to the volume you require. The contacts are numbered from
1 to 4 from right to left:
You can choose between: None, Low and High.
NB! Do not put your head beside the large auto horn when
testing. The volume is 115dB.
Light
Auto on If you switch this ON, the scooter will automatically light
the rear light when daylight drops below a certain level and
remains there for several seconds. When the light rises
above the level set, the light will switch off automatically.
It can also be switched off with the light switch.
Here you can set the level of light (lux) at which the light will
On limit
switch on.
On delay Here you can specify how long (in seconds) the level of light
must be at the selected level before the light switches on
automatically.
The actual level of light is shown here. It can be used
Actual
to gain an idea of when you wish the light to switch on
automatically.
Blinker
Auto off If you select Auto, the indicators will switch on automatically
after several seconds, which you can determine yourself.
Alternatively, they will switch off when the handlebars
are straight again when you have finished turning. This
requires the installation of a sensor to detect this.
The first option to be met will switch off the indicators. The
sensor is an additional part.
Auto off time This is where you specify the number of seconds the
indicators will flash when you have switched them on.
Alarm (Extra)
Present This is where you switch ON the anti-theft alarm, after the
scooter's wiring arrangement has been connected at the
back of the scooter. See the scooter's diagram or service
manual.
On delay Determination of the time that passes from when you
switch off the scooter with the key until the anti-theft alarm
is activated. This is the time you have to move away from
the scooter without setting off the alarm by mistake.
Can be set to 10 seconds and longer.
25 of 70 Version 2.0.9 - 2018