Medema Mini Crosser M2 Service Manual page 38

Medema A/S
Service manual P9-0157-S
It is important to fit the batteries correctly. The battery terminals
and snap locks are marked +/-. They must be fitted as shown
in the sketch below. Make sure that the snap locks are properly
closed. For the same reason there must not be any burrs on the
terminals.
Please note that the Mini Crosser can be equipped with several
types of charger (ask your dealer for information on the various
types).
Never use charging devices other than those supplied from the
factory without first contacting the dealer.
NEVER use chargers that are not designed for charging dry
maintenance-free batteries.
Polarity of charging plug
24 V
1
3
INHIBIT
NEUTRIK NC3MX charging plug seen from pin
side.
0 V
2
38 of 70 Version 2.0.9 - 2018