Medema Mini Crosser M2 Service Manual page 14

Medema A/S
Service manual P9-0157-S
Term
Extras
Anti-theft alarm
Tilt
Tilt Alarm sideways
Tilt Alarm forw./backw.
Overheating step 1
Overheating step 2
Description
(Extra) With this parameter set to ON, the anti-theft
alarm is turned on every time you turn off the Mini
Crosser. An activated alarm is turned off by turning the
key to 1 (drive).
If you have no opportunity to get to the Mini Crosser
with the key, the alarm will stop after approx. 20
seconds. Shake the scooter again, the alarm will be
activated again.
Tilt-symbols.
By exceeding the preset value, the symbol flashes and
the horn hoots, if the parameter is enabled.
By exceeding the preset value, the symbol illuminate
and the horn hoots, if the parameter is enabled.
Step 1: The symbol flashes and the speed is reduced to
half power. Wait for 3-5 min and start again.
Step 2: The symbol will illuminate and Mini Crosser
stops. Wait 3-5 minutes and start again.
14 of 70 Version 2.0.9 - 2018