Medema Mini Crosser M2 Service Manual page 40

Medema A/S
Service manual P9-0157-S
Fit the throttle cable.
Mount the switch so it points in the
correct direction. Install the dashboard.
Avoid pinching/stretching the cables.
Turn the scooter on and check that the magnetic brake clicks
when the accelerator is activated.
When the accelerator is released, it must not be possible to
push the scooter.
Check that it runs backwards when the REVERSE button is
activated.
Throttle cable.
REV
The display will now show REVERSE
in the lower left corner. Use the button
below to change to REVERSE.
40 of 70 Version 2.0.9 - 2018