Medema Mini Crosser M2 Service Manual page 44

Medema A/S
Service manual P9-0157-S
Secure the foot throttle with the screws
provided.
The programming must be changed
from wigwag to single-ended control.
See the section: Programming the
technician menu.
After completing installation, turn the scooter on and check that
the magnetic brake clicks when the accelerator is activated.
When the accelerator is released, it must not be possible to
push the scooter.
The forward and reverse foot throttle
pedal. Can be placed on the right, left
or in the middle. Must be installed as
described on the previous page.
The programming must be wigwag.
44 of 70 Version 2.0.9 - 2018