CipherLab CP60 Reference Manual page 200

CP60 Mobile Computer
Item
Default
Cust om
Launch Applicat ion
Broadcast Event
4) Re- assign t he but t on as desired, and t ap
5) Then open t he But t on Assignm ent m enu and t ap W r it e t o de vice t o apply changes.
DISABLE/ENABLE KEY FUNCTION
The last colum n in t he Device Set t ing list gives an overview of key st at us. Users can disable
or enable a key by giving a single t ap on t his colum n. By disabling keys, keys are " locked"
as no act ual funct ion will t ake place when t hey are pressed.
Enabled it em s will display as
Tap t he " Enabled" colum n t o enable or disable
t he indicat ed funct ion.
Not e:
( 1) To access t he set t ings page for a key, it s st at us needs t o be set as " Enabled" .
( 2) When a key is disabled and t hen enabled, it s funct ion will ret urn t o default set t ings.
188
Value
Set s t he key funct ion back t o fact ory default .
Provides a drop- down list t o select t he preferr ed funct ion for t he
specific key. ( Opt ions available differ wit h t he key.)
Eit her select a pre- defined funct ion, or select " " User define" and
ent er a valid ASCI I key code ( 0x00~ 0xFF) in t he t ext box.
Opens an applicat ion by pressing t he specific key. Browse t o t he .exe
file of t he desired applicat ion.
I nput a Windows m essage event which will be t riggered each t im e
t he but t on is pressed.
while disabled it em s will appear as
t o save, or t o cancel.
Once keys are disabled, t he icon changes and
t he funct ion for t hat key will appear as
" None" .
Reference Manual
.