Technical Specifications; Technical Data - THOMSON Electrak MD Series Installation Manual

7. Technical specifications

7.1 Technical data

Technical Specification
Input voltage
Input voltage tolerance
Stroke length
Static load (Fx), maximum
Dynamic load (Fx), maximum
Speed, no load / max. rated load
MDxxA025
MDxxA050
MDxxA100
MDxxA200
Current draw @ rated max. load
Weight
End play, maximum
Operating temperature limits, standard units
Full load duty cycle @ 25 °C
Restraining torque
Motor leads cross section
Signal leads cross section
Cable length (depending on option)
Protection class - static
Protection class - dynamic
Safety features
static load holding brake
internal end-of-stroke limit switches
overload protection, control options Xxx / Exx, Lxx, CNO
temperature monitoring, control options Xxx, CNO / Exx, Lxx
temperature compensation, control options Xxx / CNO, Exx, Lxx
voltage monitoring, , control options Xxx / CNO, Exx, Lxx
Compliances
Actuator Weight [kg (lb)]
50
1.1 (2.4) 1.2 (2.6)
Thomson Electrak MD Actuator - Installation Manual - 2020-02
®
[mm/s (inch/s)]
[Nm (lbf-in)]
[mm
[mm
Stroke (see product label) [mm]
100 150
1.3 (2.8)
[VDC] 12
[VDC] 9 - 16
[mm]
[N (lbs)] max. static load = max. dynamic load
[N]
[A]
[kg (lbs)]
[mm (in)]
[°C (°F)]
- 40 to + 85 (- 40 to + 185)
[%]
0 (internally restrained)
(AWG)]
2
(AWG)]
2
[m (in)] 0.3 (11.8), 1 (39.4)
200
1.4 (3.1)
Thomson
MD • •
24
18 - 32
see product label
see product label
52/43.8 (2.04/1.72)
28/18.5 (1.10/0.73)
14.5/11 (0.57/0.43)
7/5.4 (0.28/0.21)
see product label
see table below
1.2 (0.047)
see product label
0.75 (18)
0.35 (22)
IP67 / IP69K
IP66
no (self-locking)
yes
no / yes
no / yes
no / yes
no / yes
CE, ISO 13766
250 300
1.5 (3.3) 1.6 (3.5)
25