Tsc 800 Specifications - THOMSON TSC 800 - V2.2 Service Manual

10.

TSC 800 SPECIFICATIONS

POWER SUPPLY:
•
- 115 or 230VAC nominal (+10% -30%)
- 50/60Hz
- 100ma nominal (no external load connected)
SOURCE VOLTAGE SENSING:
•
- Direct 120-600VAC nominal, single or three phase
- 50/60Hz
- +/- 0.5% accuracy of setting @ 25° C
OPERATING TEMPERATURE:
•
- 15° C to +50° C
OUTPUT CONTACTS (Form C, 10A,120/250VAC resistive)
•
- Engine start
- Programmable function (not available with dual source
system logic or insulated case transfer switches)
OUTPUT SIGNALS (120/250VAC resistive load)
•
- Transfer to utility 10A
- Transfer to generator 10A
- Pre/post-transfer to utility 3A
- Pre/post-transfer to generator 3A
- Load on utility 3A
- Load on generator 3A
PM 049 REV 10 08/09/25
TSC 800 TRANSFER SWITCH CONTROLLER
76
Thomson Technology