Table of Contents
Advertisement
PostScript
Menu
Note
Note
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
PostScript Menu options establish the default PostScript
configuration for the printer. PostScript may be used by
software applications to send information and instructions to
the printer.
The 4505ps and 4510ps printers are factory-equipped with
PostScript.
PostScript is available as an option for the 4505 and 4510
printers. See Appendix D: Ordering Information.
PostScript Users:
The Xerox Windows PostScript driver allows you to either
download the PostScript header with every job, or download
it only once. If the printer is used in a network or other shared
environment, where both PCL and PostScript jobs are printed,
the header will be deleted whenever the printer switches
from PostScript to PCL. Banner sheets printed from Novell
networks cause the printer to switch between PostScript and
PCL. If Banner Sheets are printed, insure that the printer's
Language Sensing option is On. To avoid the loss of the
PostScript header, select "Download Each Job" in the
PostScript driver. The "Already Downloaded" option may be
selected in the driver if at least 10 MB of memory is installed
in the printer and the printer's State Saving option is set to On
in the printer's PostScript menu. You must download the
header at least once for each power on cycle. If several
different PostScript applications are used, the "Download
Each Job" option will guarantee that the correct header is
always available.
P o s t S c r i p t M e n u
3-29
Advertisement
Table of Contents
