See page 2-9 and page 2-13 for more information on
the standard and lower paper trays.
C h a p t e r 2 : H a n d l i n g P a p e r
L o a d i n g P a p e r
2
Remove the tray from
the printer.
Place the tray on a flat
surface.
3
If necessary, adjust the
end guide to the
desired paper size and
the side guide to its
widest position.
Make sure that the end
!
guide is positioned in the
appropriate detent for
Caution
the paper size installed in
the tray. If the guide is
not positioned in the
detent, the printer may
not correctly recognize
the installed paper size.
2-15