Table of Contents
Advertisement
You do not have a lower base installed. You want to print
Example 3
mostly on Letter (8.5 x 11) paper but sometimes on Legal
(8.5 x 14). You do not intend to do manual feeding.
1. Load the standard tray with Letter paper stock.
2. Load the MP tray with Legal paper stock.
3. Set Source Mapping for "Standard" to "Standard."
4. Set Source Mapping for "Manual" to "MP Tray."
5. Set MP Tray Size to "Legal (8.5x14)."
6. In either your software application or the Xerox printer
The printer will pull Letter paper from the standard tray. It
will pull Legal paper from the MP tray.
Alternatively, you could set Source Mapping for "Standard"
to "Standard-MP" and set your application paper source to
the standard tray for both Letter and Legal size pages. The
printer will automatically switch between the trays
according to the paper size requested. The disadvantage is
that Control Panel messages may be misleading. Whether
alerting you to load Letter or Legal paper, the Control Panel
will always display "Standard-MP" as the location to load
that paper size. You must know which paper size goes into
which tray.
S e l e c t i n g a P a p e r S o u r c e
driver, set paper source to:
— Standard tray for Letter pages.
— Manual (MP Tray) for Legal pages.
C h a p t e r 2 : H a n d l i n g P a p e r
2-29
Advertisement
Table of Contents
