Table of Contents
Advertisement
Ethernet Menu
Options
Figure 3.17 Ethernet Menu options showing factory settings
Option
Port Timeout
System Language
The Ethernet Menu, a submenu of the Interface Menu,
Figure 3.13 (page 3-38), contains options for configuring the
printer's Ethernet port, when the Ethernet option has been
installed.
The Ethernet option supports the following protocols:
•
Novell NetWare, Version 3.11
•
TCP/IP
•
EtherTalk
•
DEC LAT
•
Microsoft LAN Manager
For detailed information on the supported protocols, refer to
Networking: Ethernet packaged with the Ethernet option kit.
Figure 3.17 describes each Ethernet Menu option. Factory
settings are boldfaced and followed by an asterisk (*). See
"Setting a Menu Option" (page 3-10) for the steps to find and
change a setting, or refer to the Document Services for
Printing Guide to use the RUI to change settings.
Setting
5-999 secs (30*)
PCL*
†
PostScript
†
Appears only when the
PostScript option is
installed.
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
Description
Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
Port Timeout works in conjunction with Auto Job
End (page 3-53).
See Appendix C: I/O Port Polling for more information
on how port polling works.
Page description language (PDL) the printer will use
for print jobs coming through the Ethernet port.
When Lang. Sensing (page 3-52) is On, System
Language is used only when the printer cannot
detect the PDL used in the incoming print job.
I n t e r f a c e M e n u
3-51
Advertisement
Table of Contents
