Adding Fonts - Xerox 4505/4505ps User Manual

Adding Fonts

PostScript
Note
Utilizing fonts in addition to resident fonts can add new
dimensions to your work. Additional fonts are available
through the following:
• PostScript option. See "PostScript" (page 4-9).
• Font cards for PCL fonts. See "Font Cards" (page 4-10).
• Software applications. See "Fonts within Software
Applications" (page 4-11).
Thirty-five PostScript fonts (Adobe Type 1) are available to
your printer, either factory-installed on the 4505ps and
4510ps printers, or user-installable on the 4505 and 4510
printers as an option. See Appendix D: Ordering Information
for more information on the PostScript option.
Many additional PostScript fonts are available through Adobe
Systems, Inc. and may be used when the PostScript option is
installed on your printer.
If you have a 4505ps or 4510ps printer, see "PostScript Menu"
(page 3-29) for PostScript printer settings.
PostScript fonts are used by the PostScript Level 2 printer
language. If you plan to program in the PostScript Level 2
printer language, refer to Adobe Systems, Inc. PostScript
language reference documentation.
The Lang. Sensing settings in the Parallel (page 3-42), Serial
(page 3-46), Ethernet (page 3-52), and Token Ring (page 3-55)
Menus enable automatic switching between the PostScript
and PCL printer languages. PostScript and PCL fonts are not
interchangeable.
C h a p t e r 4 : U s i n g F o n t s
A d d i n g F o n t s
4-9