Table of Contents
Advertisement
I n t e r f a c e M e n u
LocalTalk Menu
Option
Figure 3.16 LocalTalk Menu option showing factory setting
Option
Port Timeout
3-50
4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ' s G u i d e
The LocalTalk Menu, a submenu of the Interface Menu,
Figure 3.13 (page 3-38), contains a single option for
configuring the printer's LocalTalk port, when the LocalTalk
option has been installed.
The LocalTalk option supports AppleTalk protocols. For
detailed information on the supported protocols, refer to
Networking: LocalTalk packaged with the LocalTalk option.
Figure 3.16 describes the option. The factory setting is
boldfaced and followed by an asterisk (*). See "Setting a
Menu Option" (page 3-10) for the steps to find and change
the setting.
Setting
5-999 secs (30*)
Description
Time interval for determining when to poll the next
port in the polling sequence, after the LocalTalk port
has been inactive for this amount of time.
Advertisement
Table of Contents
