Table of Contents
Advertisement
D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
Figure 7.2
Control Panel messages (continued)
Message
Install
EP Cartridge
IOT NVM Fail
Service Required
Laser Failure
Service Required
Last Page
Load A4
Load A5
Load B5
Load C5
Load Com-10
Load DL
Load Exec
Load Folio
7-8
4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ' s G u i d e
The EP cartridge is missing or not installed correctly.
ACTION: Reseat existing cartridge or install a new cartridge. See "Replacing the EP
Cartridge" (page 6-3). If problem continues, contact your dealer or Xerox / Rank
Xerox.
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume.
ACTION: Contact your dealer or Xerox / Rank Xerox.
Laser assembly has failed; printing cannot continue.
ACTION: Contact your dealer or Xerox / Rank Xerox.
The printer was busy processing data from a host but the last page was not
completed and the last page timeout has expired.
This message appears until either:
• More data arrives.
or
• Port Time Out expires and Auto Job End is On.
or
• PostScript "waittimeout" expires.
ACTION: None.
ACTION: Load A4 paper into the tray(s) indicated on the top line of the display.
ACTION: Load A5 paper into the tray(s) indicated on the top line of the display.
This message is for the manual bypass slot (MP tray) only.
ACTION: Load B5 (ISO) paper into the MP tray.
ACTION: Load C5 paper into the tray(s) indicated on the top line of the display.
ACTION: Load Com-10 envelopes (or paper) into the tray(s) indicated on the top
line of the display.
ACTION: Load DL envelopes (or paper) into the tray(s) indicated on the top line of
the display.
ACTION: Load Executive paper into the tray(s) indicated on the top line of the
display.
ACTION: Load Folio paper into the tray(s) indicated on the top line of the display.
Description/Action
Advertisement
Table of Contents
