Selecting A Paper Source - Xerox 4505/4505ps User Manual

S e l e c t i n g a P a p e r S o u r c e
Selecting a
Paper Source
Note
PCL Paper Sources
2-22 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ' s G u i d e
For a print job, your software application sends information,
called the Printer Command Language (PCL), to the printer to
communicate paper source and page size. How the printer
interprets the PCL command for paper source and page size
depends on the printer menu settings for Source Mapping
and MP Tray Size. If PCL commands for paper source and
page size are not sent to the printer, the printer menu settings
for Paper Size and Default Source are used. See
Chapter 3: Using the Control Panel for further information on
these and all PCL Menu settings (page 3-18).
PostScript functions differently than PCL. Refer to the
PostScript Installation Instructions for more information.
Paper source is a term that describes the tray, feeder, or slot
from which the printer feeds paper.
PCL, and therefore your printer, recognizes the six paper
sources shown in Figure 2.10, which may, or may not, appear
in your software application.
Figure 2.10 Six PCL paper sources
PCL Paper Source
Standard
Manual
Manual Envelope
Lower
Large Capacity
Envelope Feeder
Alternate Names
Upper, Paper Tray, Paper Cassette
Manual, Manual Feed
Envelope Manual Feed
Paper Deck