Intended Use - Otto Bock 17B98 Series Instructions For Use Manual

lamination bars provides better anchoring in the laminate.
The bevelled section of the lamination bars with the bore hole (4.2 mm) is
used for attachment to the 17Y106 PVC profile material with double hollow
rivets (not included in the scope of delivery).

3 Intended use

3.1 Indications for use
The orthotic ankle joints are to be used exclusively in pairs to provide
orthotic treatment for a patient's lower limbs and are intended for processing
using lamination technology.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
3.3 Combination possibilities
The 17B98* orthotic ankle joints can be combined with the 17B97* orthotic
knee joints (see 647H160 instructions for use).
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 General safety instructions
CAUTION
Incorrect alignment, assembly or adjustment
Injury and damage to product components
► Observe the alignment, assembly and adjustment instructions.
► Work on the product may only be carried out by qualified personnel.
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
► Only use the product for the defined area of application.
12