Installation; Connect The Power Supply - Eaton NZM2 Manual

NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)

Installation

78
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• identified,
• parameterized
• controlled
• monitored,
• diagnosed,
via the PROFIBUS DP from a higher-level master.

Connect the power supply

The NZM-XDI-DPV1 is operated by a 24 V DC supply voltage
(a section "Technical data", Page 68).
Warning
With the 24 V power supply, ensure a safe electrical
isolation of the low voltage (SELV).
+24 V
0 V
> 1 A
Figure 15: Standard connection
11/04 MN01219002Z-EN
+24 V 0 V