Display Of Used Parameters - Eaton NZM2 Manual

11/04 MN01219002Z-EN
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Value for standard
display
assignment
(decimal)
12
13
14
15
16
17
18
19

Display of used parameters

The display of the parameters for currents which are used
depends on the form of representation selected in the DMI,
and is either an absolute value in Amps or relative to I
The representation form can be selected via the
PROFIBUS-DP with the aid of the DMI object basic settings.
In the default state, the relative representation option is
preselected. The display of the used time parameters is
always absolute.
h
Please note that you can only display used parameters and
currents which the connected circuit-breaker actually
provides. If you select a parameter or current which is not
available, the selected line is not displayed.
h Please note that the "No display" selection for a selected
line also has the effect that all following lines are not
represented on the DMI.
PROFIBUS-DPV1 functions
Meaning, displayed in the selected
line:
Current value: I
nrms
Current value: I
dnrms
Selected motor-starter function
Motor state
Current state of the inputs I0 to I5
Current state of the outputs Q0 to Q5
Time
Date
or I .
r n
161