Device Designation; System Overview - Eaton NZM2 Manual

User Notes

Device designation

System overview

10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following terms are used in the manual:
DMI for NZM-XDMI612.
The following communication components are the
accessories that are used for establishing communication
with the NZM2, 3 and 4 circuit-breakers.
• DMI for connecting the circuit-breaker; manages the NZM
data and relays it to the fieldbus interface when necessary
(a chapter 2 Page 11).
• Fieldbus coupling enables data exchange with the
circuit-breaker via the DMI. The NZM-XDMI-DPV1
PROFIBUS-DP interface from the easy product range is
currently used (a chapter 3 Page 75).
• NZM-XPC-Soft is a PC user interface for the DMI and
NZM. It enables user-friendly parameter setting and
firmware updating of the DMI, as well as the data
scanning, parameter setting and diagnostics of the circuit-
breaker
(a http://www.eaton.com/moeller
Search term: MN01219003Z).
Compatability of DMI with field bus modules:
NZM-XDMI612 easy-204-DP
V1.1.x j
V1.2.1, V1.2.2 –
1) PROFIBUS interface for DMI
11/04 MN01219002Z-EN
￫
Support
1)
NZM-XDMI-DPV1
V1.10
–
j