Object Compilation B - Eaton NZM2 Manual

11/04 MN01219002Z-EN
Variable access
(example)
LS_Status[49]
LS_Status[50]
LS_Status[51]
LS_Status[52]
LS_Status[53]
LS_Status[54]
LS_Status[55]
LS_Status[56]
1) The meaning is relevant when the respective Bit is set.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Data position Meaning
1)
Octet 31 Fault states
Bit 0 NZM fault: A/D convertor
Bit 1 NZM fault: Signal processing
Bit 2 NZM fault: Convertor block
Bit 3 NZM fault: EEPROM
Bit 4 NZM plug in module 1 fault
Bit 5 NZM plug in module 2 fault
Bit 6 NZM plug in module 3 fault
Bit 7 NZM plug in module 4 fault

Object compilation B

This object contain a ready-made compilation of the data
content of the following objects:
• Parameters used by circuit-breaker,
• Circuit-breaker locally set parameters.
This object is a read only object. It can be accessed by class 1
and/or a class 2 DPV1 master.
Intended usage
Use this object if you want to obtain information about the
data content of the contained objects with a read operation.
Note all the information contained in the descriptions of the
individual objects which are included.
PROFIBUS-DPV1 functions
185