WisyCom MCR54 Series User Manual page 5

MCR54 User Manual
Audio Layout
As shown on the above schematic, MCR54 provides the following audio signals:

HP [HEADPHONE]: an analog monitor audio output to headphone 3.5mm jack socket.
Thanks to the "Setup>Headphone" menu the user can select which of the 4 receivers he
wants to listen to and can adjust the volume from 0 to -24 step 1dB.

BOT [MAIN]: 4 audio signal streams come out in the connector on the bottom and
depending on the plugged slot-in can be configured according to the following table:
None
AUX
MAIN
(Base
outputs)

TOP [AUX]: 2 audio signal streams come out in the TA5 top feed connector and can be
configured in digital (enabling AES3 on AUX outputs) or in analog
None
AUX
MAIN
(Base outputs)
4
Slot in (SLK54-IK/SX)
CH1 CH2
An [RXi] An [RXi]
An [RXi] An [RXi]
AES** AES**
[RX1+RX2] [RX3+RX4]
AUX (on TOP FEED)
CH1
An [RXi] An [RXi]
AES
[RX1+RX2] [RX3+RX4]
An [RXi] An [RXi]
BASE outputs (on BPA54)
CH1 CH2
An [RX1] An [RX2]
An [RX1] An [RX2]
AES AES
[RX1+RX2] [RX3+RX4]
CH2
AES
CH3 CH4
An [RX3] An [RX4]
An [RX3] An [RX4]
- -