Xerox Wide Format 510DP Operator's Manual page 31

Option
DIAGNOSTICS
BILLING METERS
XEROX WIDE FORMAT 510dp OPERATOR MANUAL
Table 1. Printer Menu options (continued)
Sub-option
TEST PLOT
PRINTER DIAGNOSTICS
RECENT FAULT LOG
METER A
METER B
Function
Allows you to run a test print in off-line mode
from each media source. The selections are
ROLL 1, ROLL 2, ROLL 3, and BYPASS.
Reserved for use by the service
representative and is password protected.
Displays a record of the last 99 printer faults.
You may be asked to provide information from
this log when placing a call for service.
Provides a record of the total number of
square feet/meters of prints produced. This
number is useful for both billing and service
purposes.
Provides a record of the total number of linear
feet/meters of prints produced. This number
is useful for both billing and service purposes.
OFF-LINE SETUP MENU
21