Safety Notes - Xerox Wide Format 510DP Operator's Manual

Safety notes

Your system has been designed and tested to meet strict safety
requirements. These include safety agency examination and
approval plus compliance with established environmental
standards.
Please read the following instructions carefully before operating
the printer and refer to them as needed to ensure continued safe
operations.
Follow all warnings and instructions marked on or supplied with the
product.
Unplug the units from the wall outlet before cleaning the exterior.
Always use materials specifically designated for the printer. Use of
other materials may result in poor performance and could create a
hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this
operator guide for the proper cleaning methods.
Never use supplies or cleaning materials for purposes other than
what they were intended. Keep all supplies and materials out of
the reach of children.
Do not use the units near water, wet locations, or outdoors.
The components of this product are equipped with a three-wire,
grounding-type plug (i.e., a plug having a grounding pin). This
plug will only fit into a grounding-type power outlet. This is a safety
feature. To avoid the risk of electric shock, contact your electrician
to replace the receptacle if you are unable to insert the plug into
the outlet.
Never use a ground adapter plug to connect the system to a power
source that lacks a ground connection terminal.
This system should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of
power available, consult your local power company.
The power supply cord is the disconnect device for this equipment.
Make sure that the installation is near the socket outlet and is
easily accessible.
Do not allow anything to rest on the power cord. Do not locate the
units where someone will step on the cord.
The units should not be placed in a built-in installation unless
proper ventilation is provided.
XEROX WIDE FORMAT 510DP OPERATOR MANUAL v