Xantrex XTR6-110, XTR8-100, XTR12-70, XTR20-42, XTR33-25, XTR40-21, XTR60-14, XTR80-10.5, XTR100-8.5, XTR150-5.6, XTR300-2.8, XTR600-1.4 Operating Manual page 232

Table A-9 System Commands (Continued)
Select Current
[:]SYSTem[<channel>]:COMMunicate
Analog :APRogram:LEVel:CURRent[:ISOLated]
Programming
Input Voltage
Input Level/
Range
Select the [:]SYSTem[<channel>]:COMMunicate
address to [:MCHannel]:ADDRess
communicate
with.
Select
[:]SYSTem:COMMunicate[:SELF]:ADDRess
Address
Setup the
[:]SYSTem[<channel>]:REMote:SOURce
Voltage [:VOLTAGage]:ISOLated
control source
for Isolated
APG.
Setup the
[:]SYSTem[<channel>]:REMote:SOURce
Voltage [:VOLTAGage]:[NISOlated]
control source
for Non-
Isolated APG.
Setup the
[:]SYSTem[<channel>]:REMote:SOURce
Current :CURRent:ISOLated
control source
for Isolated
APG.
Select level for Current
APG. Level can be between
2 -10 volts.
Select the current device to
receive the commands. The
parameter for this
command is the address set
on the front panel under the
remote
Select the power supply
unit to communicate with.
Alter or query the state of
the remote programming
Isolated Voltage APG
source.
Query remote control
source for voltage.
Query remote control
source for isolated voltage.
?|<Level(2– Yes
10)>|MAXimum|MI
Nimum
Yes
?|<Address (1–30) Yes
Yes
?|LOCal|AVOLtage
|ARESistive
Yes
?|LOCal|AVOLtage
|ARESistive
Yes
?|LOCal|AVOLtage
|ARESistive