4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
The SCPI commands for these instructions are:
Quick Tip
Remote operation
[:]SYSTem[<channel>]:REMote:SOURce[:VOLTage][:NISOlated]
uses these SCPI
commands. See
[:]SYSTem[<channel>]:COMMunicate:APRogram:LEVel[:VOLTage]
page 5–1.
[:ISOlated]
[:]MEASure[<channel>]:APRogram[:VOLTage][:SCALar][:DC]?
975-0200-01-01
The output voltage display should read LE U and the output current
display will display APG level.
deactivate the APG voltage mode.
Analog Programming Mode
4-11
4