Xantrex XTR6-110, XTR8-100, XTR12-70, XTR20-42, XTR33-25, XTR40-21, XTR60-14, XTR80-10.5, XTR100-8.5, XTR150-5.6, XTR300-2.8, XTR600-1.4 Operating Manual page 227

Table A-4 SCPI Commands for Calibration (Continued)
Calibrate the [:]CALibration[<channel>]:MONitor
Voltage :CURRent:ISOLated
controlled
Isolated
Current APG
feature
Calibrate the
[:]CALibration[<channel>]:OUTPut
Voltage :ANALog[:VOLTage]
controlled
Non Isolated
Voltage APG
feature
Calibrate the
[:]CALibration[<channel>]:OUTPut
Voltage :ANALog[:VOLTage]:ISOLated
controlled
Isolated
Voltage APG
feature
Calibrate the [:]CALibration[<channel>]:OUTPut
Voltage :ANALog:CURRent
controlled
Non Isolated
Current APG
feature
Calibrate the
[:]CALibration[<channel>]:OUTPut
Voltage :ANALog:CURRent:ISOLated
controlled
Isolated
Current APG
feature
Calibrate the isolated ? | <NR1> |
current monitor signal <nothing for
system. interactive mode>
Calibrate the voltage analog ? | <NR1> |
programming system. <nothing for
interactive mode>
Calibrates the voltage ? | <NR1> |
analog programming <nothing for
system. interactive mode>
Calibrate the current analog ? | <NR1> |
programming system. <nothing for
interactive mode>
Calibrates the current ? | <NR1> |
analog programming <nothing for
system. interactive mode>
Yes
Yes
Yes
Yes
Yes