Xantrex XTR6-110, XTR8-100, XTR12-70, XTR20-42, XTR33-25, XTR40-21, XTR60-14, XTR80-10.5, XTR100-8.5, XTR150-5.6, XTR300-2.8, XTR600-1.4 Operating Manual page 228

Table A-4 SCPI Commands for Calibration (Continued)
Calibrate the
[:]CALibration[<channel>]:OUTPut
Resistive :ANALog[:VOLTage]:RESistive
controlled
Non Isolated
Voltage APG
feature
Calibrate the [:]CALibration[<channel>]:OUTPut
Resistive :ANALog[:VOLTage] :RESistive:ISOLated
controlled
Isolated
Voltage APG
feature
Calibrate the
[:]CALibration[<channel>]:OUTPut
Resistive :ANALog:CURRent:RESistive
controlled
Non Isolated
Current APG
feature
Calibrate the
[:]CALibration[<channel>]:OUTPut
Resistive :ANALog:CURRent:RESistive:ISOLated
controlled
Isolated
Current APG
feature
Get Ouput
[:]CALibration[<channel>]:PARameter
Calibration [:OUTPut]
Parameters
Get Analog
[:]CALibration[<channel>]:PARameter
Programming :APRogram
Calibration
Parameters
Calibrate the Resistive
controlled voltage analog
programming system.
Calibrates the Resistive
controlled voltage analog
programming system.
Calibrate the Resistive
controlled current analog
programming system.
Calibrates the Resistive
controlled current analog
programming system.
Queries and loads the output
calibration parameters in
arbitrary program block data
format.
Queries and loads the APG
calibration parameters in
arbitrary program block data
format.
? | <NR1> | Yes
<nothing for
interactive mode>
? | <NR1> | Yes
<nothing for
interactive mode>
? | <NR1> | Yes
<nothing for
interactive mode>
? | <NR1> | Yes
<nothing for
interactive mode>
?|<arbitrary Yes
program block
data>
?|<arbitray program Yes
block data>