3. Press the Rotary knob/Enter button to select the APG mode.
4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
The SCPI command (s) for these instructions are:
Quick Tip
Remote operation
[:]SYSTem[<channel>]:REMote:SOURce:CURRent[:NISOLated]
uses these SCPI
commands. See
[:]SYSTem[<channel>]:COMMunicate:APRogram:LEVel:CURRent
page 5–1.
[:ISOlated]
[:]MEASure[<channel>]:APRogram:CURRent[:SCALar][:DC]?
975-0200-01-01
The output voltage display should read LE C and the output current
display will display APG level.
deactivate the APG voltage mode.
Analog Programming Mode
4-13
4