Output Connectors - Xantrex XPD 120-4.5 Operating Manual

Section 1. Features and Specifications
Rear Panel Connectors
Output
Low Voltage Models Equipped with positive and negative busbars. The busbars
are offset to facilitate load cable connections.
Connectors
.
Figure 1.4 Output Busbars - note polarity markings
High Voltage Models High voltage models are equipped with a 4-terminal output
block. The top two are positive terminals whereas the lower two are negative. Screw
clamps are used to secure load connections.
Figure 1.5 Output Terminal - note polarity markings
14
WARNING
Disconnect the AC input before making any connections to the unit.
WARNING
Disconnect the AC input before making any connections. Lethal voltages may be
present at the output terminals for up to 15 seconds after the AC power has been
removed.
(Low Voltage Models)
(High Voltage Models)
Operating Manual for XPD Series Power Supply