Rear Panel J210 Connector - Xantrex XPD 120-4.5 Operating Manual

Rear Panel
The J210 Analog Interface connector is a 15-pin female DSUB connector located on
the rear panel. See
J210
shutdown 15 pin DSUB connector for remote programming and monitoring
Connector
functions. See
recommend that you mate the J210 connector with a 15-pin male connector, such as
a Tyco 747908-2 or equivalent.
The J210 connector provides access to the following functions:
•
•
•
See
Figure 1.6 Analog Interface Programming and Monitoring J210 Connector
See
corresponding functions.
Release A
Figure
Figure 1.2
Remote programming of both output voltage and current
Calibrated readback signals for remote monitoring of output voltage and output
current
Isolated remote shutdown function using a 5-15 V signal
Figure 1.6 for a graphic presentation of the J210 connector and its pinouts.
Table 1.2 for a list of the J210 connector pin numbers, their references, and
Section 1. Features and Specifications
1.6. Use the J210 programming, monitoring, and
for the location of the J210 connector at the rear panel. We
8
15
Rear Panel Connectors
1
9
15