Kegel FLEX 17-5801 Operator's Manual page 48

Warning: When removing the rear cover, be extra careful to unplug the LED light located on
the inside of the cover!
Side Cover Removal
With the machine in the up-right transport position, locate the two (2)
screws that mount the bottom of the side cover as shown, on a Flex
Walker.
The Flex machine will have three (3) mounting screws like the one
shown at the top of picture.
NOTE: On the Flex Walker it will be necessary to remove the bumper
wheels on both sides of the lane machine, note the adjustment.
Next, set the machine down in the operating position and remove both lids. Remove the
two (2) screws in each guard that fasten the side covers to frame.
10 pin side 7 pin side
36