Kegel FLEX 17-5801 Operator's Manual page 163

PLC Inputs and Testing
The PLC assembly of the machine has 24 inputs, 16 relay outputs, and two analog outputs.
Inputs accept data from various sensors or switches in the machine and then use that
information to control functions of the machine through its outputs. Here is a list of the
INPUT numbers for the PLC along with their wire color and designations:
INPUT DESCRIPTION
000 * ON LANE SENSOR (OLS)
001 BOARD COUNTING PROX SENSOR
002 LEFT OIL HEAD REVERSING PROX SENSOR
003 RIGHT OIL HEAD REVERSING PROX SENSOR
004 BUFFER BRUSH UP SWITCH
005 BUFFER BRUSH DOWN SWITCH
006 DRIVE SHAFT TACHOMETER PROX SENSOR
007 LANE DISTANCE PROXIMITY SENSOR (LDS)
008 RESUME BUTTON / HANDLE BUTTON (FLEX ONLY) VIOLET
009 STEPPER DRIVE SWITCH
010 DUSTER UP SWITCHES (2)
011 BUFFER TACH
100 SQUEEGEE DOWN SWITCH
101 SQUEEGEE UP SWITCH
102 OIL FLOAT SWITCH
103 CLEANER FLOAT SWITCH
104 RECOVERY TANK SWITCH
105 * 10-PIN APPROACH SENSOR
106 * 7-PIN APPROACH SENSOR
107 * STOP BY SENSOR
108 MANUAL DUSTER / CLEANER CALIBRATION
109 * 7-PIN WHISKER
110 * 10-PIN WHISKER
111 * BUMPER SWITCHES (2)
Note: Inputs with an * next to them are only used in the Walker.
151
WIRE COLOR
YELLOW / ORANGE
RED / WHITE
RED / ORANGE
ORANGE / BLACK
GREEN / WHITE
VIOLET / YELLOW
BLACK / BLUE
WHITE / PINK
BROWN / YELLOW
GREEN / BLACK
BROWN/BLUE
BLACK
YELLOW / GREEN
GRAY / WHITE
GRAY / BLACK
VIOLET / GREEN
GRAY / ORANGE
GRAY / BROWN
WHITE / ORANGE
BROWN / VIOLET
VIOLET / ORANGE
RED / VIOLET
GREEN