Kegel FLEX 17-5801 Operator's Manual page 24

Not using a funnel with a filter may cause the tank's internal filter to become clogged
frequently and reduce the cleaner output, resulting in inadequate cleaning. This may lead
to customer complaints, ball calls and an excess of out-of-range pins. When necessary, the
supply tank can be removed for cleaning.
Do not spill cleaner on the electrical components. Spills may cause a "short", which may
send a false signal to the PLC causing improper operation. A wet switch may also produce a
dim LED light on the PLC.
Any spills or drops of cleaner onto the approach should be wiped up immediately!
Any spills on the machine can stain the paint and make the machine ugly.
Ugly machines do not run as well as clean, sharp, and highly maintained machines.
TECHNICAL
If the lanes are going to be cleaned, make sure the Cleaner Supply Tank is filled, the
Recovery Tank is empty, and an adequate supply of Lane Cleaning Cloth is installed before
beginning operation. Always empty the recovery tank when filling the supply tank or
standing the machine to transport position.
12