Kegel FLEX 17-5801 Operator's Manual page 167

INPUT / OUTPUT TEST
Go to the main menu and select INPUT/OUTPUT TEST and the screen will change to the first
test screen. Press on an output selection to test, below is an example of the BRUSH LIFT
test. The Brush Lift test also shows the inputs that control the motor to stop in the proper
position. When testing the motor you are also testing and watching for correct switch
operation at the same time.
To check inputs, press on one of the two input screens to view. The inputs that are on will
change color to yellow. To test an input you will need to physically operate the switch by
pressing on it or pass metal by a proximity sensor.
155