Ground Wire Installation - Dynojet POWER COMMANDER III Installation Instructions

Ground wire
i925-411 www.powercommander.com
Remove bolts
Ground wire
11
12
13
14
Route the PCIII ground wire around the front
of the engine (Fig. G).
Using the supplied zip ties attach the PCIII
ground wire to the stock hose.
Remove the battery cover by removing the
two bolts (Fig. H).
Attach the PCIII ground wire to the negative
side of the battery (Fig. J).
Reinstall the battery cover.
2005-2007 KTM Superduke - PCIII USB - 4