Advertisement
Table of Contents
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
3
Zip ties
2
Velcro
1
Alcohol swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
i815-511
www.powercommander.com
2007 Harley-Davidson V-Rod
I n s ta l l a t i o n I n s t r u c t i o n s
Button Adjustment Display
Faceplate Buttons
Expansion Port
2007 Harley-Davidson V-Rod - PCIII USB - 1
USB Port
Advertisement
Table of Contents
Related Manuals for Dynojet Power Commander III
Summary of Contents for Dynojet Power Commander III
- Page 1 Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com i815-511 www.powercommander.com 2007 Harley-Davidson V-Rod - PCIII USB - 1...
- Page 2 Remove these nuts Open the main seat compart- ment. Remove the rear seat by remov- ing the two nuts (Fig. A). Unplug the stock wiring harness from the ECM (Fig. B). Unplug Stock connector Connect the PCIII wiring har- ness in-line of the stock harness and ECM (Fig.
- Page 3 Install the PCIII on top of the fuel tank (Fig. D). The supplied velcro can be used to secure the PCIII in place if desired. Reinstall the rear seat making sure the PCIII wiring harness does not get damaged. i815-511 www.powercommander.com 2007 Harley-Davidson V-Rod - PCIII USB - 3...
Need help?
Do you have a question about the Power Commander III and is the answer not in the manual?
Questions and answers