Advertisement
2006-2008 Honda VFR800 VTEC
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
2
O2 eliminators
2
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
i126-411
www.powercommander.com
Installation Instructions
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
2006-2007 Honda VFR800 - PCIII USB - 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynojet POWER COMMANDER III
Summary of Contents for Dynojet POWER COMMANDER III
- Page 1 Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com i126-411 www.powercommander.com 2006-2007 Honda VFR800 - PCIII USB - 1...
- Page 2 Remove the main seat. Remove the front two fuel tank mounting bolts. Prop the front of the fuel tank Locate the throttle body wiring harness connector (Fig. A). This connector is located on the right hand side of the bike under the right, rear corner of the air box.
- Page 3 Locate the stock O2 sensor connections (Fig. F). Unplug both the front and rear exhaust O2 sensors. Plug the Dynojet O2 eliminators into the stock wiring harness in place of the stock O2 sensors. The stock O2 sensors no longer...
Need help?
Do you have a question about the POWER COMMANDER III and is the answer not in the manual?
Questions and answers