Advertisement
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i105-411
2000-2001 Honda RC51
Installation Instructions
Button Adjustment Display
Faceplate Buttons
Expansion Port
2000-2001 Honda RC51 - PCIII USB - 1
USB Port
Advertisement
Table of Contents
Related Manuals for Dynojet Power Commander III
Summary of Contents for Dynojet Power Commander III
-
Page 1: Installation Instructions
Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com i105-411 2000-2001 Honda RC51 - PCIII USB - 1... - Page 2 Remove the main seat and rear solo seat cover. Prop the front of the fuel tank Locate the connector in Fig. A. Unplug this connector. This connector is located on the left hand side of the bike. Unplug this connector Plug the grey connectors from the PCIII inline of the stock Stock connectors...
- Page 3 With the supplied self adhesive velcro, attach the PCIII towards the rear most area of the inner fender (Fig. E). Use the supplied alcohol swab to clean both surfaces before attaching. i105-411 www.powercommander.com 2000-2001 Honda RC51- PCIII USB - 3...
Need help?
Do you have a question about the Power Commander III and is the answer not in the manual?
Questions and answers